Escort (EZ Mag Mount) - Powered RAD MAG Mount

Minimalist / 2 pin - Power Only (Standard) / 12V Bare Wire and Ground Loop (Standard)

$97.00

$97.00 $149.00

Escort (EZ Mag Mount) - Powered RAD MAG Mount

1 reviews

$97.00

$97.00 $149.00

30-day money-back guarantee

Snap in for instant power, pull off for security
No cables between your detector and the windshield
Rock-solid hold engineered for highway vibration
Plug-and-play with factory hardware — Uses your original 25mm pivoting bracket.

Requires 25mm EZ MAG pivot bracket — included with your detector.

30-Day Money-Back Guarantee

Mount it. Drive it. If it’s not right, send it back for a full refund.

Full policy ›

Receiver Cable Minimalist Braided Sleeve (15CM)

Pin Count 2 pin - Power Only (Standard) 4 Pin - Remote Mute - (Requires Hardwire kit)

Power Source 12V Bare Wire and Ground Loop (Standard) Mirror Tap Spade Plugs (No Fuse) Exposed Wire Tips (on Receiver end)

Instant Snap-On Connection: Uses high-grade N45 magnets for a secure, one-handed mounting experience that takes less than a second.
Cable-Free Power: Integrated Pogo-pin connectors deliver seamless power directly to your Uniden, allowing you to ditch the messy cables forever.

NZ-Tough Stability: Precision-crafted from UV Stable ASA to ensure a rattle-free, vibration-proof mount that survives New Zealand’s harshest roads.
Extreme Grip: N45 magnets rated for 4.5kg of force—it won’t budge until you want it to.
Integrated Power: Built-in terminals eliminate messy dangling cables.
ASA Construction: withstand high-heat windscreen environments.

Escort Redline 360C
Escort Redline EX
Escort 360c
Escort MAX 3
Escort Redline EX
Escort MAX 360c / MAX 360c MKII
All Escort EZ Mag Detectors

Powered Windscreen Mount powered receiver with adhesive pre-applied.
3+ Meters of twin power and ground cable pre-crimped with ground screw loop.
Powered Escort Radar Detector Compatible mount
4-Pin Variant Wires: Includes 4 short leads (10cm+ each) for wiring/soldering to your remote mute switch.

Factory Hardware: You must re-use the mounting bolt, square-neck screw, and pivoting bracket from your original Escort Sticky Cup mount.

Hardwire Installation: Basic automotive electrical knowledge to connect the 3+ meter power/ground cable to your vehicle’s fuse box or 12V source.

The 2-Pin and 4-Pin mounts are not cross-compatible — the detector, mount, and receiver must all match the same pin configuration.

2-Pin — Power only. No remote mute or alert out. Fits Uniden R1, R3 and Valentine One Gen 1.

4-Pin — Power plus remote mute / alert out / ESP data. Fits Uniden R4, R7, R8, Escort EZ Mag and Valentine One Gen 2.

If you're unsure which version your detector uses, message us before ordering and we'll confirm.

4 Pin Wiring Guide (Mute button)
Detector Mount
Powered Mount

Frequently asked questions

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.

The process is super simple and is virtually the same for both Escort and Uniden Detectors.

Click Here for a video tutorial: Video Tutorial

All you need to do is connect the 12V Power source and the negative loop terminal.

Here is a guide to follow.

Our products are manufactured both locally from 3D Printed parts and imported electronics. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.

Note: 3D Parts can have slight imperfections. However, they are functionally tested and are tested to work as intended.

Shipping is calculated based on your location and the items in your order. You will always know the shipping price before you purchase.

No — the 2-Pin and 4-Pin RAD MAG mounts are not cross-compatible. They use different connectors and pin layouts, detector mount and receiver must all match the same pin configuration to work.

2-Pin mounts are for power-only detectors (no remote mute / alert out)
4-Pin mounts carry power plus the smart remote-mute / alert-out / ESP data line — used on Uniden R4, R7, R8, Escort EZ Mag and Valentine One Gen 2.

Plugging a 4-pin detector into a 2-pin base (or the reverse) physically won't seat, and forcing a brand-mismatched 4-pin harness can permanently damage the detector. Always order the version that matches the detector you actually own — every product page lists the confirmed-fit models. If you're unsure, message us before you buy and we'll confirm in writing.