Uniden R8 / R7 / R4 - Powered RAD MAG Mount

Minimalist / 2 pin - Power Only (Standard) / 12V Bare Wire and Ground Loop (Standard)

$97.00

$97.00 $149.00

Uniden R8 / R7 / R4 - Powered RAD MAG Mount

3 reviews

$97.00

$97.00 $149.00

30-day money-back guarantee

Magnetically snaps in to power up, pulls off instantly to protect against theft.
Engineered for the exact form factor of the R4, R7, and R8
Routes your power cable inside the mount — hidden by design

Requires 25mm pivot bracket — included with your detector or Uniden Swivel Bracket Kit - Detector Models: R1/R3/R4/R7/R8

30-Day Money-Back Guarantee

Mount it. Drive it. If it’s not right, send it back for a full refund.

Full policy ›

Receiver Cable Minimalist Braided Sleeve (15CM)

Pin Count 2 pin - Power Only (Standard) 4 Pin - Remote Mute - (Requires Hardwire kit)

Power Source 12V Bare Wire and Ground Loop (Standard) Mirror Tap Spade Plugs (No Fuse) Exposed Wire Tips (on Receiver end)

Instant Snap-On Connection: Uses high-grade N45 magnets for a secure, one-handed mounting experience that takes less than a second.
Cable-Free Power: Integrated Pogo-pin connectors deliver seamless power directly to your Uniden, allowing you to ditch the messy cables forever.
NZ-Tough Stability: Precision-crafted from UV Stable ASA to ensure a rattle-free, vibration-proof mount that survives New Zealand’s harshest roads.
Extreme Grip: N45 magnets rated for 4.5kg of force—it won’t budge until you want it to.
Integrated Power: Built-in terminals eliminate messy dangling cables.
ASA Construction: withstand s high-heat windscreen environments.

Uniden R4
Uniden R7
Uniden R8

Powered RAD MAG Windscreen Receiver (with pre-applied adhesive).

3+ Meters of twin power/ground cable (pre-crimped).

Powered Uniden R-Series compatible mount. RJ11 terminated wire with Radar Detector holder. It requires a swivel mount and other hardware that ship with the R4/R7/R8.

4-Pin Variant Wires: Includes 4 short leads (10cm+ each) for wiring/soldering to your remote mute switch.

A 12V power source (hardwire installation recommended).

Note: You will need to transfer over your square neck screw, thumb screw and pivoting mount.

These can be purchased here.

The 2-Pin and 4-Pin mounts are not cross-compatible — the detector, mount, and receiver must all match the same pin configuration.

2-Pin — Power only. No remote mute or alert out. Fits Uniden R1, R3 and Valentine One Gen 1.

4-Pin — Power plus remote mute / alert out / ESP data. Fits Uniden R4, R7, R8, Escort EZ Mag and Valentine One Gen 2.

If you're unsure which version your detector uses, message us before ordering and we'll confirm.

4 Pin Wiring Guide (Mute button)
Detector Mount
Powered Mount

Frequently asked questions

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.

The process is super simple and is virtually the same for both Escort and Uniden Detectors.

Click Here for a video tutorial: Video Tutorial

All you need to do is connect the 12V Power source and the negative loop terminal.

Here is a guide to follow.

Our products are manufactured both locally from 3D Printed parts and imported electronics. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.

Note: 3D Parts can have slight imperfections. However, they are functionally tested and are tested to work as intended.

Shipping is calculated based on your location and the items in your order. You will always know the shipping price before you purchase.

No — the 2-Pin and 4-Pin RAD MAG mounts are not cross-compatible. They use different connectors and pin layouts, detector mount and receiver must all match the same pin configuration to work.

2-Pin mounts are for power-only detectors (no remote mute / alert out)
4-Pin mounts carry power plus the smart remote-mute / alert-out / ESP data line — used on Uniden R4, R7, R8, Escort EZ Mag and Valentine One Gen 2.

Plugging a 4-pin detector into a 2-pin base (or the reverse) physically won't seat, and forcing a brand-mismatched 4-pin harness can permanently damage the detector. Always order the version that matches the detector you actually own — every product page lists the confirmed-fit models. If you're unsure, message us before you buy and we'll confirm in writing.